Solutions for the industry
Ready-made formulas and custom developments for specific production tasks
Hot rolling of tubes (800-1200°C)
SVK water-based process lubricants are applied to the blank before it enters the hot-rolling stand. The organic component burns off on the hot surface; the mineral component forms a separating layer between metal and roll. The result: deformation force reduced by 25-40% and less metal pickup on the tool.
Conversion coatings for wire and tube drawing
Before cold drawing, the metal must be covered with a thin phosphate film that acts as a lubricant carrier. The SVK alumino-phosphate binder series — AFS, ABFS, AMFS, AKhFS-1, and AKhFS-2 — forms a uniform structure 3-10 µm thick that delivers a stable friction coefficient through the die.
PFAS-free formulations for rolled steel exports to the EU and US
The VTS (high-temperature process lubricants) and AKhFS (alumino-phosphate binder) series are built on mineral and inorganic chemistries free of perfluorooctanoic compounds (PFAS, PFOA, PFOS) — compliant with REACH Annex XVII restrictions and ISO 14001 certified. For rolled steel shipped to EU, US, and UK markets — no compliance fines and simplified certification of export lots.
Products for forging and stamping
6 specialised products that solve your production challenges
High-temperature process lubricants
Water-based lubricant for hot rolling
High-temperature process lubricants
Water-based lubricant for hot rolling
AFS composition (alumino-phosphate)
Inorganic binder
AFS composition (alumino-phosphate)
Inorganic binder
ABFS composition (alumino-boron-phosphate)
Inorganic binder
ABFS composition (alumino-boron-phosphate)
Inorganic binder
AMFS composition (alumino-magnesium-phosphate)
Inorganic binder
AMFS composition (alumino-magnesium-phosphate)
Inorganic binder
AKhFS-1 composition
Alumino-chromium-phosphate composite
AKhFS-1 composition
Alumino-chromium-phosphate composite
| Product | Type | Application | Documents | |
|---|---|---|---|---|
High-temperature process lubricants | Water-based lubricant for hot rolling | Tube rolling at 800-1200°C, 25-40% lower deformation force | TDS | Sample |
| Inorganic binder | Heat-resistant coatings, conversion layers for drawing | TDS | Sample | |
| Inorganic binder | Ceramic and heat-resistant compositions | On request | Sample | |
| Inorganic binder | Higher coating strength, pre-drawing preparation | On request | Sample | |
AKhFS-1 composition | Alumino-chromium-phosphate composite | Ferrous metal protection at high temperatures | TDS | Sample |
AKhFS-2 composition | Alumino-chromium-phosphate composite | Fixation on stainless steels and non-ferrous metals | TDS | Sample |
SVK exceeds industry benchmarks
Comparison of SVK results against industry averages. Data verified in our own laboratory.
Industry baseline
-25–40%
up to 1000°C
up to 1200°C
5-15 µm
3-10 µm
Get a recommendation for your production
Describe your task — and our specialists will pick the optimal solution from SVK's lineup within 24 hours.